How to enter unlocking codes for Blackberry and other mobile units

Blackberry 8100 Code Entry Instructions
Solution
How to Enter Unlock Codes on BlackBerry 8100 Pearl:
Model : BlackBerry 8100c 8100r 8100g 8100v Pearl

1 - This can be done with or without sim card.
2 - Go to Options Menu => Advanced Options.
3 - Go to Sim Card Menu
4 - Now Type MEPP2 (Press, and hold the ALT key while typing 2. you
will not see anything on screen while typing. ALT key is beside * key,
symbol like arrow key.)
5- You will see "Enter Network MEP code (number of attempts left will appearing brackets).
6- Enter your Network MEP code (unlock code) GsmFather server provided, than press enter.
7- You will see "Code Accepted."
8-. You have permanently unlocked your BlackBerry.
9- Power off your BlackBerry, than insert your desired SIM card.







1) Go to Options Menu => Advanced Options

2) In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd

3) You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2

*You won't see any text while you are typing either one of these.

4) Enter the unlock code.

Blackberry 8700 Code Entry Instructions
Solution
How to Enter Unlock Codes on BlackBerry 8700:

8700c Unlocking Info

***** You must have a SIM card in your phone to complete these steps, I
have found that this procedure works best with an AT&T or Cingular
Sim card in
the phone ( Can be active or inactive ) Make sure the phone is not displaying the low battery warning! *****

1. go to settings

2 go to options

3. go to advanced options

4. go to sim card

5. Type MEPD (not case sensitive) ( you will not see text appear on screen
while typing )

6. Does it say Network active? if so your phone is locked

7. Hold the ALT Key while typing in MEPE ( not case sensitive ) ( you
will not see text appear on screen while typing )

8. It will say "Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm.

9. Your phone is now unlocked





Blackberry 8800 Code Entry Instructions

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****


1. Go to settings menu => and then Options
3. Select Advanced options => and then Sim card
5. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
6. Hold the ALT Key while typing in MEPE on your Blackberry keyboard
(NOTE: You will not see any text appear on the screen while typing MEPD)
8. You should be presented with a prompt "Enter Network MEP Code". Type
in the 16 digit unlock code received from newmobilefreedom and press in
the track wheel / jog dial to confirm
9. Your phone is now unlocked
How to Enter Unlock Codes on BlackBerry 6*** 7***: ie 6230, 7100, 7290 etc..
ENTERING CODE:
Now select Options menu on BB.
Now you select SIM CARD menu.
To be able to see this you have to type this on the keypad on phone :
(TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
Usually u should see "active" NET lock. Now in order to disable this
lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear
a dialog asking for code.
NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2
Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.)
Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.

Treo 680,650 600 Code Entry Instructions
Solution How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones

1. Remove Treo battery, unplug cable
2. Insert incorrect SIM card (Any simcard that the phone does not accept)
3. Power on Treo-650, 'Sim not allowed' is displayed, click OK
4. Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:

*#*#(MEP-CODE)# then press dial
Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software

For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:

*#*#12345678# , then press dial
Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by the unlock software.

5. Phone will reset and display sim lock removed

TREO 750 UNLOCK CODE ENTRY

Insert a non native sim card (didn’t come with the phone) and when prompted for unlock code enter the code you were given.



Cingular BlackJack Code Entry
Solution How to Enter Unlock Codes on Cingular BlackJack

Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted


NOTE: If you are unable to connect to service provider or unable to
make out going calls or recieve messages, this has nothing to do with
your phone being locked or not, you need to force the BlackJack to
change to GSM mode, this can be done as follows:

Power on your Phone

1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM

This should resolve your problem.

HP iPaq Code Entry
Solution How to Enter Unlock Codes on HP iPaq series phones
(iPaq 6315, 6325, 6300, 6515 , etc)

1 .On the Today screen, tap Start > Settings.

2. Tap the Phone Band icon.

3. Tap the Keyboard icon to open the virtual keyboard

4. Tap Shift and then Ctl key to enable the keys.

5. Tap the blank area below the band selection box to open the unlock tool.

6. Tap Shift and then Ctl to disable the keys.

7. Enter the 8-digit unlock code and tap OK when done.

8. Wait for the device to validate the unlock code (about five
seconds). You will see one of the following screens:

-Unlock successful.

-Unlock failed due to incorrect code. The user has three attempts to
unlock. After three attempts, the device will refuse any more
unlocking attempts. Perform a soft reset to reset the counter to
perform additional unlocking attempts.

-Device is not ready for unlocking. This error message displays when
the user tries to unlock when the phone application (not the device)
is not in a steady state. It takes 30 seconds after powering on the
phone for it to reach a steady state.

Sonyericsson Code Entry
Solution How to Enter Unlock Codes on Sony-Ericsson Cell Phones

1- Switch ON your phone without Sim card
2- Press 1 time the left arrow
3- Press 2 times the button *
4- Press 1 time the left arrow
5- 'Personalize with MNC2' will appear
6- You can now enter your unlock code

If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press
'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by
'Down arrow'' to direct the Jogdial down

Motorola Subsidy Code Entry
Solution How to Enter Motorola Subsidy/Unlock Codes

Switch ON your phone with a not allowed Sim card, the phone show 'Enter
Special Code' or 'Enter Subsidy Code', you can now enter your unlock
code.

Note: If you get the prompt "Contact Service Provider" or "Phone
Blocked" , please leave your phone on at that prompt for upto 8 hours.
This will reset the phone's internal timer and automatically change the
prompt to "Enter Subsidy Code" , at which point you should enter the
unlock codes exactly as provided.

LG Unlock Code Entry Instructions
Solution How to Enter Unlock Codes On LG Mobile Phones

Model : LG F2250



With orange sim card in the start menu tape : 2945#*3311# handset show
saved then return to startup screen press Menu key, choose Settings
> Security > Sim Lock> Network > Deactivate, handset will
now show 'Enter NCK' tape your unlock code and OK.



Model : LG U8110



With not allowed sim card enter Pin code then validate tape :
277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your
phone is now unlocked.



Model : LG U8210



With a not allowed sim card enter Pin code then validate tape :
277634#*#, now you show test menu choose Sim test menu and tape :
2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code
Simlock, then OK.



Model : U8150



Switch ON your phone with a not allowed Sim card, compose : 277634#*#, go to menu 'Sim Lock' and enter your unlock code.



Model : all other



Switch ON your phone with an allowed sim card and compose :



2945#*5101# - LG 510w



1945#*5101# - LG 1200 & B1200



2945#*5221# - LG 5200 & 52200



2945#*5301# - LG 5300



2945#*5401# - LG 5400



2945#*70001# - LG 7020



2945#*7101# - LG 7100



2945#*1201# - LG 1100 & 1300



2945#*70001# - LG 7250T & 1100



2945#*2201# - LG C2200



2945#*5301# - LG T5100



2945#*3311# - C3310



Go to 'Menu' and then to 'Settings', select 'Security', to finish
select 'Network Provider' and select 'Desactivate' then type your
unlock code.





LG CU-500 Unlock Code Entry HOW-TO
Solution How-To Enter Unlock Codes on LG CU500 mobile phones:

-Insert a non-Cingular SIM card into your LG CU 500 and power on your phone
-When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad
-On the next screen enter the unlock code provided than press OK.

Samsung D807 Code Entry
Solution Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)

If 'Insert Correct SIM card' message appears: enter #0111*code#




Motorola Code Entry

IMPORTANT: You have five tries to enter this code into your phone. If
you go beyond the five tries unsuccessfully your phone will not be able
to be unlocked.



1. Insert the non-native(from dif provider than phone) SIM card.

2. Turn on your handset.

You will then be prompted to enter the eight digit unlock code.
Your unlock code is:
The handset is then successfully unlocked.


All other Motorola handset models use these instructions:



1. Insert the non-native(from dif provider than phone) SIM card.

2. Turn on your handset.

3. Press and hold the * key until a box appears.

4. Enter *#32#

5. Press OK

6. Enter the unlock code:

7. The handset is then successfully unlocked.




------------------------------------------------------------------

How to enter my Unlock Code on BlackBerry?

Model : BlackBerry 8700.8800.8300.8320

You must have a SIM card in your phone to complete these steps ( Can be
active or inactive )

WARNING: The Wireless Mode MUST be OFF before performing the given SIM
Unlock instructions in order to avoid causing the device from becoming
defective.

How to turn Wireless Mode Off:
1. Scroll to (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.


How to Unlock the device:

1. On the Home screen, click the Tools icon ( Setting Menu ). The Options
screen appears.
2. In the Options screen, select "Advance options".
3. Scroll to "SIM Card" and select it. You should see the phone number and
the SIM ID number.
5. Press and Hold ALT key and Type MEPE
6. It will say "Enter Network MEP Code", then you type in the Unlock code.
7. Press ENTER and reboot handheld.
8. Your phone is now unlocked


Model : BlackBerry 8100c 8100r 8100g 8100v Pearl

1 - This can be done with or without sim card.
2 - Go to Options Menu => Advanced Options.
3 - Go to Sim Card Menu
4 - Now Type MEPP2 (Press, and hold the ALT key while typing 2. you
will not see anything on screen while typing. ALT key is beside * key,
symbol like arrow key.)
5- You will see "Enter Network MEP code (number of attempts left will appearing brackets).
6- Enter your Network MEP code (unlock code) GsmFather server provided, than press enter.
7- You will see "Code Accepted."
8-. You have permanently unlocked your BlackBerry.
9- Power off your BlackBerry, than insert your desired SIM card.


Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from
only using SIM cards from Vodafone Australia. In case of difficulties,
please refer to the FAQ listed below

1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)
6. Select “Turn Wireless Off”
7. Select “Settings” Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with “Enter Network MEP code (255 left)” on the
screen, enter the 16-digit network unlock code provided for your phone,
then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically.
This will be confirmed if you can make and receive calls with the
Non-Vodafone Australia SIM card. (You will need reception and phone
credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock
the device will be delayed for 10 seconds increments. The number of
unlocking attempts is limited to 255 tries only. When 255 attempts is
reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No
outgoing calls including emergency call is possible when the phone is
blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a
PIN. This is not the unlocking code that has just been provided. For
information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card
please read the manual that came with your phone. This is not a handset
unlocking difficulty.

Question: My handset displays a different message then what is shown in
this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM
card”. Because each handset may have a different variation in software
there is no common message. If your handset displays a different
message it is recommended to move onto the next step. Note: Faulty SIM
Cards - The handset may also display messages indicating the SIM you
are using to unlock the handset is faulty, it could display “Insert
SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card
is inserted correctly – Gold area downwards and the cut of the corner
matches correctly. You will need a working Non Vodafone SIM card to
unlock the handset, Vodafone can not assists with other networks faulty
SIMs.

Question: I am outside of Australia and experiencing difficulties
unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties de******ion. Vodafone Australia can only send a reply to the difficulty by email.

-----------

Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

thnkaaaaaaaaaaaaaaaa